Mold release agent is a chemical used to prevent other materials from bonding to surfaces. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release.
Release agents provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency. Even when a release agent is used, factors such as irregular applications or improper release agent choice may have a dramatic effect on the quality and consistency of the finished product.
SAKURAI mould release agent MK-HR305 compound is made by a variety of wax, high solid content, mainly used in car seats, headrests, rebound PU toys and other product components, especially for the 30-55 ℃ cold cure foam.
Milky white liquid
The content of active substance
Density(20 º C)
Viscosity(20 º C)
It does not contain harmful solvents and heavy metals,such as alkyl phenols,amines, plasticizers, mercury, cadmium and lead, in the use of reduced evaporation of harmful gases.Very slight in the mold release agent accumulation;When releasing the superior low temperature performance, best used at 30-60 ℃;When use can be brush, brush coating, spray coating, etc operations.Diluted before use with solvent use 7-9 times, a reasonable choice of dilution according to the size of the gun caliber.
We supply free sample within1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process.You should adjust a suitable dilution ratio according to the specific practical testing.